You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »


host login IP:         131.175.43.130   

beta access (internal):      28 March, 2023

beta access (external beta users):    31 March, 2023

start of production: May, 2023 (Booster) 

                                   last quarter 2023 (Data Centric/General Purpose )


This system is the new pre-exascale Tier-0 EuroHPC supercomputer hosted by CINECA and currently built in the Bologna Technopole, Italy. It is supplied by ATOS, based on a BullSequana XH2135 supercomputer nodes, each with four NVIDIA Tensor Core GPUs and a single Intel CPU. It also uses NVIDIA Mellanox HDR 200Gb/s InfiniBand connectivity, with smart in-network computing acceleration engines that enable extremely low latency and high data throughput to provide the highest AI and HPC application performance and scalability.

System Architecture

Architecture: Atos BullSequana XH21355 "Da Vinci" blade - Booster (in β preproduction) - Atos BullSequana X2610 compute blade - Data-centric (will be available in the last quarter of the 2023)
Internal Network:
Nvidia Mellanox HDRDragonFly+ 200 Gb/s
Storage: 106 PB (raw) Large capacity storage, 620 GB/s
                   High Performance Storage 5.4 PB, 1.4 TB/s Based on 31 x DDN Exascaler ES400NVX2

Login nodes: in β production 1 (16 later): login14 accessible via IP 131.175.43.130, icelake nogpu




Booster

Data Centric

Model

Atos BullSequana XH21355 "Da Vinci" blade

Atos BullSequana X2610 compute blade

Racks

150

Nodes

3456

1536

Processors

32 cores Intel Ice Lake 

Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz

56 cores Intel Sapphire Rapids

Accelerators

4 x NVIDIA Ampere GPUs/node, 64GB HBM2

-

Cores

32 cores/node

56 cores/node

RAM

512 (8x64) GB DDR4 3200 MHz

(16 x 32) GB DDR5 4800 MHz

Peak Performance

about 309 Pflop/s

9 Pflops/s

Internal Network

NVIDIA Mellanox HDR DragonFly++ 200Gb/s
2 x NVIDIA HDR 2×100 Gb/s cards
1x Nvidia HDR100 100 Gb/s card

Disk Space

106PB Large capacity storage
5.4 PB of High performance storage






The β access phase

Leonardo is currently under testing by the vendor team, CINECA staff, and authorized external users. The environment is not finalized yet on storage, system configuration, and software stack.  

The storage configuration is not finalized. PLEASE minimize your occupation on the filesystem.

Software environment

The available software environment is based on spack and modules, and needs to be activated. Some vendor installations are also available and presented in an lmod environment on the login node, but we warmly encourage the beta testers to use the spack environment to provide a valuable feedback on the software stack provided by CINECA. 

The temporary stack is available with:

   $ source /home/cinprod/spack_setup.sh
   $ module use /home/cinprod/spack/02/modules/BA/0.19/
   $ module load spack

Please note that we are still optimizing Leonardo software stack, and more installations may be added/replaced. Always check with "module av" (the hash in the module name can change).

Beta-production environment

The production environment is based on the slurm scheduler, already in place on the cluster but in a very preliminary configuration.

  • The only available partition is "prod" (#SBATCH --partition=prod).  Please refer to the general online guide to slurm and on task/thread bindings, and please pay attention to the setting of the SRUN_CPUS_PER_TASK for hybrid applications dispatched with "srun". In this preliminary configuration, please explicit the request of the correct pmix plugin when launching your parallel applications with "srun": srun --mpi=pmix_v3 <options>  <exe>. No mpi settings are needed if you launch with "mpirun".
  • The GPUs are not yet defined as G(eneral)res(ources) (Gres), and all the 4 GPUs of a node will be available in a job. Do not ask for gres=gpu:X (or analogous --gpus-per-node)  in your script. Take the node in exclusive with the #SBATCH --exclusive directive
  • The $SBATCH --exclusive directive is also recommended to avoid annoying drawbacks on the $TMPDIR of job

Pre-production environment

Storage:

  • the scratch areas are now available ($CINECA_SCRATCH or $SCRATCH)
  • home filesystem:
    • BETA-0 users: your old home is still available at the path /leonardo/smcx_home/<username>.  A quota of 100 GB has been enforced, and most likely you will not be able to add more data. We already started the sync of the /home/<username> contents to the corresponding user scratch in the <username> sub-directory. We'll inform you when the copy is finished (a stop will be required for the last rsync). After a check from your side that everything was successfully copied, we'll proceed with the data removal in /leonardo/smcx_home/<username>. You can however reprise your activity now on your scratch area, just copy there the needed input files and scripts.

    • BETA-1 users: you started already with the home at the correct path, /leonardo/home/userexternal/<username>. The 100 GB quota is enforced as well. Please copy the contents not supposed to be in your $HOME to your $SCRATCH (we will NOT move the contents of the new homes), and remove from $HOME the transferred data. You can reprise your activity now on your scratch area, just copy there the needed input files and scripts.
  • work filesystem: the $WORK areas are not available yet. Until they will be configured and put in place the automatic cleaning of the scratch area will NOT be active.

Slurm:

  • use the "boost_usr_prod" partition in the place of "prod". You can use at most 32 nodes on this partition (MaxTime=24:00:00). Please request the boost_qos_bprod QOS to go up to 512 nodes (MaxTime=10:00:00) This limit will be in place until May 25, when it will be reduced to 256 nodes with MaxTime=24:00:00 (production environment) before May 25.
  • you have to request the gpus with --gres=gpu:X or --gpus-per-node=X
  • the --mpi=pmix_v3 is not required anymore when launching with srun
  • No labels