UG3.2: LEONARDO UserGuide

hostname: login.leonardo.cineca.it

                       login01-ext.leonardo.cineca.it

                       login02-ext.leonardo.cineca.it

                       login05-ext.leonardo.cineca.it

                       login07-ext.leonardo.cineca.it

early availability:      March, 2023

start of pre-production: June, 2023 (Booster) 

                                   last quarter 2023 (Data Centric)

start of production: August 2023 (Booster)

This system is the new pre-exascale Tier-0 EuroHPC supercomputer hosted by CINECA and currently built in the Bologna Technopole, Italy. It is supplied by ATOS, based on a BullSequana XH2135 supercomputer nodes, each with four NVIDIA Tensor Core GPUs and a single Intel CPU. It also uses NVIDIA Mellanox HDR 200Gb/s InfiniBand connectivity, with smart in-network computing acceleration engines that enable extremely low latency and high data throughput to provide the highest AI and HPC application performance and scalability.

System Architecture

Architecture: Atos BullSequana XH21355 "Da Vinci" blade - Booster - Atos BullSequana X2610 compute blade - Data-centric (will be available in the last quarter of the 2023)
Internal Network: Nvidia Mellanox HDR DragonFly+ 200 Gb/s
Storage: 106 PB (raw) Large capacity storage, 620 GB/s
                   High Performance Storage 5.4 PB, 1.4 TB/s Based on 31 x DDN Exascaler ES400NVX2

Login nodes: 4 nodes, icelake no-gpu

Peak performance details

Access

All the login nodes have an identical environment and can be reached with SSH (Secure Shell) protocol using the "collective" hostname:

> login.leonardo.cineca.it

which establishes a connection to one of the available login nodes.  To connect to Leonardo you can also indicate explicitly  the login nodes:

> login01-ext.leonardo.cineca.it
> login02-ext.leonardo.cineca.it 
> login05-ext.leonardo.cineca.it
> login07-ext.leonardo.cineca.it

The mandatory access to Leonardo is the two-factor authentication (2FA). Please refer to this link of the User Guide to activate and connect via 2FA. For information about data transfer from other computers please follow the instructions and caveats on the dedicated section Data storage or the document  Data Management.

Accounting

The accounting (consumed budget) is active from the start of the production phase. For accounting information please consult our dedicated section.

The account_no (or project) is important for batch executions. You need to indicate an account_no to be accounted for in the scheduler, using the flag "-A"

#SBATCH -A <account_no>

With the "saldo -b" command you can list all the account_no associated with your username. 

> saldo -b   (reports projects defined on LEONARDO )

Please note that the accounting is in terms of consumed core hours, but it strongly depends also on the requested memory and number of GPUs, please refer to the dedicated section.

Budget Linearization policy

On LEONARDO, as on the other HPC clusters in Cineca, a linearization policy for the usage of project budgets has been defined and implemented. The goal is to improve the response time, giving users the opportunity of using the cpu hours assigned to their project in relation to their actual size (total amount of core-hours).

Disks and Filesystems

The storage organization conforms to the CINECA infrastructure (see Section Data Storage and Filesystems). 

In addition to the home directory $HOME, for each user is defined a scratch area $CINECA_SCRATCH, a large disk for the storage of run time data and files.

A $WORK area is defined for each active project on the system, reserved for all the collaborators of the project.

• The automatic cleaning of the scratch area is NOT active yet, but it will soon be enforced.

It is also available a temporary storage local to nodes on login and compute nodes (on the latter it is generated when the job starts) and accessible via environment variable $TMPDIR. For more details please see the dedicated section of UG2.5: Data storage and FileSystems.

Since all the filesystems are based on Lustre, the usual unix command "quota" is not working. Use the local command cindata to query for disk usage and quota ("cindata -h" for help) that will be available soon.

> cindata

Software environment

Module environment

The software modules are collected in different profiles and organized by functional categories (compilers, libraries, tools, applications,...). The profiles are of two types: “programming” type (base and advanced) for compilation, debugging and profiling activities, and  “domain” type (chem-phys, lifesc,..) for the production activity. They can be loaded together.

"Base" profile is the default. It is automatically loaded after login and it contains basic modules for the programming activities (ibm, gnu, pgi, cuda compilers, math libraries, profiling and debugging tools,..).

If you want to use a module placed under other profiles, for example an application module, you will have to previously load the corresponding profile:

> module load profile/<profile name>
> module load <module name>

Almost all the softwares on Leonardo were installed with Spack manager, which loads automatically the possible dependencies, so autoload command is unnecessary.

For listing all profiles you have loaded you can use the following command:

> module list

In order to detect all profiles, categories and modules available on LEONARDO, the command “modmap” is available as for the other clusters. With modmap you can see if the desired module is available and which profile you have to load to use it.

> modmap -m <module_name> 

 Spack environment

In case you don't find a software you are interested in, you can install it by yourself. 
In this case, on Leonardo  we also offer the possibility to use the “spack” environment by loading the corresponding module. Please refer to the dedicated section in UG2.6: Production Environment

Please note that we are still optimizing Leonardo software stack, and more installations may be added/replaced. Always check with "module av" (the hash in the module name can change).

GPU and intra/inter connection environment

It will be described soon.

Production environment

Since LEONARDO is a general purpose system and is used by several users at the same time, long production jobs must be submitted using a queuing system (scheduler). The scheduler guarantees that the access to the resources is as fair as possible

The production environment on LEONARDO, is based on the slurm scheduler, already in place on the cluster but still not complete and in a pre-production configuration.

Leonardo is based on a policy of node sharing among different jobs, i.e. a job can ask for resources and these can also be a part of a node, for example few cores and 1GPU. This means that, at a given time, one physical node can be allocated to multiple jobs of different users. Nevertheless, exclusivity at the level of the single core is guaranteed by low-level mechanisms.

Roughly speaking, there are two different modes to use an HPC system: Interactive and Batch. For a general discussion see the section Production Environment.

Interactive

A serial program can be executed in the standard UNIX way:

> ./program

This is allowed only for very short runs on the login nodes. Soon we will impose 10 minutes cpu-time limit  for the interactive processes.  Please do not execute parallel applications on the login nodes! 

Batch

As usual on HPC systems, the large production runs are executed in batch mode. This means that the user writes a list of commands into a file (for example script.x) and then submits it to a scheduler (SLURM for Leonardo) that will search for the required resources in the system. As soon as the resources are available script.x is executed and the results and sent back to the user.

This is an example of script file:

#!/bin/bash
#SBATCH -A <account_name>
#SBATCH -p boost_usr_prod
#SBATCH --time 00:10:00     # format: HH:MM:SS
#SBATCH -N 1                # 1 node
#SBATCH --ntasks-per-node=4 # 4 tasks out of 32
#SBATCH --gres=gpu:4        # 4 gpus per node out of 4
#SBATCH --mem=123000          # memory per node out of 494000MB 
#SBATCH --job-name=my_batch_job

srun ./myexecutable 

• Please refer to the general online guide to slurm and on task/thread bindings, and please pay attention to the setting of the SRUN_CPUS_PER_TASK for hybrid applications dispatched with "srun". 

You can write your script file (for example script.x) using any editor, then you submit it using the command:

> sbatch script.x

The script file must contain both directives to SLURM and commands to be executed, as better described in the section  Batch Scheduler SLURM. 

Using SLURM directives you indicate the account_number (-A: which project pays for this work), where to run the job (-p: partition), what is the maximum duration of the run (--time: time limit). Moreover you indicate the resources needed, in terms of cores, GPUs (later) and memory. 

One of the commands will be probably the launch of a parallel MPI application. In this case the right command is srun, as an alternative to the usual mpirun command. In this way you will get full support for process tracking, accounting, task affinity, suspend/resume and other features.

Please note: the "mail" directives are not effective yet.

SLURM partitions

A list of partitions defined on the cluster, with access rights and resources definition, can be displayed with the command sinfo:

> sinfo -o "%10D %20F %P"

The command returns a more readable output which shows, for each partition, the total number of nodes and the number of nodes by state in the format "Allocated/Idle/Other/Total".

In the following table you can find the main features and limits imposed on the partitions of Leonardo.

• For EUROFusion users and their dedicated queues please refer to the dedicated document.

Graphic session

It will be available soon. 

Programming environment

Leonardo compute nodes host four A100  GPUs per node (CUDA compute capability 8.0). The most recent versions of nVIDIA CUDA toolkit and of the nVIDIA nvhpc compilers (ex PGI, supporting CUDA Fortran) is available in the module environment.

Compilers

You can check the complete list of available compilers on Leonardo with the command:

> module available

and checking the "compilers" section. The available compilers are:

• Gnu Compilers Collection (GCC)
  
• NVIDIA nvhpc (ex PGI)
  
• CUDA

NVIDIA nvhpc (ex PORTLAND PGI + NVIDIA CUDA)

As of August 5, 2020, the "PGI Compilers and Tools" technology is a part of the NVIDIA HPC SDK product, available as a free download from NVIDIA.

For legacy reasons, the nVIDIA nvhpc suite also offers the PGI C, C++, and Fortran compilers with their original names:

To enable CUDA C++ or CUDA Fortran, and link with the CUDA runtime libraries, use the -cuda option (-Mcuda is deprecated). Use the -gpu option to tailor the compilation of target accelerator regions.

The OpenACC parallelization is enabled by the -acc flag. GPU targeting and code generation can be controlled by adding the -⁠gpu flag to the compiler command line. 

The OpenMP parallelization is enabled by the -mp compiler option. The GPU offload via OpenMP is enabled by the -mp=gpu option.

GNU compiler collection

The gnu compilers are always available. GCC version 8.5.0 is available without the need to load any gcc module. In the module environment you can find more recent version though.

The name of the GNU compilers are:

• g77: Fortran77 compiler
• gfortran: Fortran95 compiler
• gcc: C compiler
• g++: C++ compiler

The documentation can be obtained with the man command after loading the gnu module:

> man gfortan
> man gcc

CUDA

Compute Unified Device Architecture is a parallel computing platform and programming model developed by NVIDIA for general computing on graphical processing units (GPUs). With CUDA, developers are able to dramatically speed up computing applications by harnessing the power of GPUs. 

In GPU-accelerated applications, the sequential part of the workload runs on the CPU – which is optimized for single-threaded performance – while the compute intensive portion of the application runs on thousands of GPU cores in parallel. When using CUDA, developers program in popular languages such as C, C++, Fortran, Python and MATLAB and express parallelism through extensions in the form of a few basic keywords. We refer to the NVIDIA CUDA Parallel Computing Platform documentation.

Debugger and Profilers

If at runtime your code dies, then there is a problem. In order to solve it, you can decide to analyze the core file (core not available with PGI compilers) or to run your code using the debugger.

Compiler flags

Whatever your decision, in any case, you need to enable compiler runtime checks, by putting specific flags during the compilation phase. In the following we describe those flags for the different Fortran compilers: if you are using the C or C++ compiler, please check before because the flags may differ.

The following flags are generally available for all compilers and are mandatory for an easier debugging session:

-O0     Lower level of optimization
-g      Produce debugging information

Other flags are compiler specific and are described in the following:

PORTLAND Group (PGI) Compilers

The following flags are useful (in addition to "-O0 -g") for debugging your code:

-C                     Add array bounds checking
-Ktrap=ovf,divz,inv    Controls the behavior of the processor when exceptions occur: 
                       FP overflow, divide by zero, invalid operands

GNU Fortran compilers

The following flags are useful (in addition to "-O0 -g")for debugging your code:

-Wall             Enables warnings pertaining to usage that should be avoided
-fbounds-check    Checks for array subscripts.

Debuggers available

GNU: gdb (serial debugger)

GDB is the GNU Project debugger and allows you to see what is going on 'inside' your program while it executes -- or what the program was doing at the moment it crashed.

VALGRIND

Valgrind is a framework for building dynamic analysis tools. There are Valgrind tools that can automatically detect many memory management and threading bugs, and profile your programs in detail. The Valgrind distribution currently includes six production-quality tools: a memory error detector, two thread error detectors, a cache and branch-prediction profiler, a call-graph generating cache profiler, and a heap profiler.

Valgrind is Open Source / Free Software, and is freely available under the GNU General Public License, version 2.

Profilers

In software engineering, profiling is the investigation of a program's behavior using information gathered as the program executes. The usual purpose of this analysis is to determine which sections of a program to optimize - to increase its overall speed, decrease its memory requirement or sometimes both.

A (code) profiler is a performance analysis tool that, most commonly, measures only the frequency and duration of function calls, but there are other specific types of profilers (e.g. memory profilers) in addition to more comprehensive profilers, capable of gathering extensive performance data.

gprof

The GNU profiler gprof is a useful tool for measuring the performance of a program. It records the number of calls to each function and the amount of time spent there, on a per-function basis. Functions which consume a large fraction of the run-time can be identified easily from the output of gprof. Efforts to speed up a program should concentrate first on those functions which dominate the total run-time.

gprof uses data collected by the -pg compiler flag to construct a text display of the functions within your application (call tree and CPU time spent in every subroutine). It also provides quick access to the profiled data, which let you identify the functions that are the most CPU-intensive. The text display also lets you manipulate the display in order to focus on the application's critical areas.

Usage:

> gfortran -pg -O3 -o myexec myprog.f90
> ./myexec
> ls -ltr
   .......
   -rw-r--r-- 1 aer0 cineca-staff    506 Apr  6 15:33 gmon.out
> gprof myexec gmon.out

It is also possible to profile at code line-level (see "man gprof" for other options). In this case, you must use also the “-g” flag at compilation time:

> gfortran -pg -g -O3 -o myexec myprog.f90
> ./myexec
> ls -ltr
   .......
   -rw-r--r-- 1 aer0 cineca-staff    506 Apr  6 15:33 gmon.out
> gprof -annotated-source myexec gmon.out

It is possible to profile MPI programs. In this case, the environment variable GMON_OUT_PREFIX must be defined in order to allow to each task to write a different statistical file. Setting

export GMON_OUT_PREFIX=<name>

 once the run is finished each task will create a file with its process ID (PID) extension

<name>.$PID

 If the environmental variable is not set every task will write the same gmon.out file.

Nvidia Nsight System (GPU profiler)

Nvidia Nsight System is a system-wide performance analysis tool designed to visualize an application’s algorithms, help you identify the largest opportunities to optimize, and tune to scale efficiently across any quantity or size of CPUs and GPUs; from large server to our smallest SoC.
You can find general info on how to use it in the dedicated Nvidia User Guide pages.

Our suggestion is to run the CLI inside your job script in order to generate the qdrep files. Then you can download the qdrep files on your local PC and visualize them with the Nsight System GUI available on your workstation.

The profiler is available under the module nvhpc.

Standard usage of an MPI job running on GPU is

> mpirun <options> nsys profile -o ${PWD}/output_%q{OMPI_COMM_WORLD_RANK} -f true --stats=true --cuda-memory-usage=true <your_code> <input> <output>

On the single node you can also run the profiler as "nsys profile mpirun", but keep in mind that with this syntax nsys will put everything in a single report.

Unfortunately nsys usually generates several files in /tmp dir of the compute node even if a TMPDIR environment variable is set. These files may be big causing the filling of the /tmp folder and, as a consequence, the crash of the compute node and the failure of the job.
In order to avoid such a problem we strongly suggest to include in your sbatch script the following lines around your mpirun call as a workaround:

> rm -rf /tmp/nvidia
> ln -s $TMPDIR /tmp/nvidia
> mpirun ... nsys profile ...
> rm -rf /tmp/nvidia

This will place the temporary outputs of the nsys code in your TMPDIR folder that by default is /dev/shm/slurm_job.$SLURM_JOB_ID where you have about 250 GB of free space.
This workaround may cause conflicts between multiple jobs running this profiler on a compute node at the same time, so we strongly suggest also to request the compute node exclusively:

#SBATCH --exclusive

MPI environment

We offer two options for MPI environment on LEONARDO:

• Open MPI
• Intel-OneAPI-MPI

Here you can find some useful details on how to use them on LEONARDO.

Compiling

OpenMPI

This most common MPI implementation is installed inside the GNU environment.
It is configured to support CUDA-aware.

To install MPI applications using Open MPI you have to load openmpi module (use "modmap -m openmpi" command to see the available Open MPI versions) and select the MPI compiler wrapper for Fortran, C or C++ codes.

The openmpi module provides the following wrappers:

e.g. Compiling C code

> module load openmpi/<version>
> mpicc -o myexec  myprog.c (uses the gcc compiler)

You can add all options available for the backend compiler (you can show it  by "-show" flag, e.g. "mpicc -show").  In order to list them type the "man" command:

> man mpicc

Intel-OneAPI-MPI

This is the MPI implementation of Intel and doesn't support CUDA.

To install MPI applications using Intel MPI you have to load intel-oneapi-mpi module (use "modmap  -m intel-oneapi-mpi command to see the available versions).

The intel-oneapi-mpi module provides the following wrappers for classic intel compilers and oneapi ("x") compilers:

e.g. Compiling Fortran code

> module load intel-oneapi-mpi/<version>
> mpiifort -o myexec  myprog.f90 (uses the ifort compiler)

You can add all options available for the backend compiler (you can show it  by "-show" flag, e.g. "mpicc -show").  In order to list them type the "man" command

> man mpiifort

Running

To run MPI applications they are two way:

• using mpirun launcher
• using srun launcher 

mpirun launcher 

To use mpirun launcher  the openmpi or intel-oneapi-mpi module needs to be loaded:

> module load openmpi/<version>

or

> module load intel-onepi-mpi/version

> mpirun ./mpi_exec  

It can be used via salloc or sbatch way:

> salloc -N 2 (allocate a job of 2 nodes)
> mpirun ./mpi_exec

or

> sbatch -N 2 my_batch_script.sh (allocate a job of 2 nodes) 
> cat my_batch_script.sh
#!/bin/sh
mpirun ./mpi_exec

srun launcher 

MPI applications can be launched directly with the slurm launcher srun

> srun -N 2  ./mpi_exec

or via salloc/sbatch way:

> salloc -N 2 (allocate a job of 2 nodes)
> srun ./mpi_exec

or

> sbatch -N 2 my_batch_script.sh (allocate a job of 2 nodes) 
> vi my_batch_script.sh
#!/bin/sh
srun -N 2  ./mpi_exec

Scientific libraries

Linear Algebra

GPU accelerated

The nvidia math libraries are available by loadind "nvhpc" module (use "modmap -m nvhpc" command to see the available versions of nvhpc).

For not nvidia math libraries installed with cuda support they are available by loading the corresponding module e.g "module load magma/<vers>".  Notice that when you load the module of any of these libraries the CUDA module is not automatically loaded).

• BLAS: nvidia cublas, magma 
• LAPACK: nvidia cusolver, magma 
• SCALAPACK:  slate 
• EIGENVALUE SOLVERS: nvidia cusolver, magma (single-node), slate, elpa and slepC (multi-node) 
• SPARCE MATRICES and : nvidia cuSPARSE, PetSc (multi-node), SuperLU-dist (multi-node)
• Hypre (multi-node)

 CUDA not supported 

• BLAS: openblas,  intel-oneapi-mkl
• LAPACK: openblas, intel-oneapi-mkl
• SCALAPACK:  netlib-scalapack, intel-oneapi-mkl

Fast Fourier Transform

GPU accelerated

The nvidia math libraries are available by loadind "nvhpc" module (use "modmap -m nvhpc" command to see the available versions of nvhpc). 

• nvidia cuFFT/cuFFTW (single-node)

CUDA not supported

• FFTW (single and multi-node)